Saving to file problems
Saving to file problems
Hi first time using Fantasoft and having problems trying to save to file and then re-opening it again.
I'm giving it a name to go into my hard drive file which is saved ok, but when I try to open it up next time it's saying file is corrupt or error and not found, showing instead a totally new bmp extension and title which I've never seen before so the file and all work is lost.... I've tried finding the bmp file in my computer search files but nothing.
Any ideas what I'm doing wrong please ?
Thanks
I'm giving it a name to go into my hard drive file which is saved ok, but when I try to open it up next time it's saying file is corrupt or error and not found, showing instead a totally new bmp extension and title which I've never seen before so the file and all work is lost.... I've tried finding the bmp file in my computer search files but nothing.
Any ideas what I'm doing wrong please ?
Thanks
Re: Saving to file problems
Just note that the source image files you import into FantaMorph are not embeded in the project file, so please don't move, delete or rename them even if the project is saved ok, or else FantaMorph can't locate the original image files.
Re: Saving to file problems
OK thanks. Is it still possible to retrieve the files or are they gone for good ?
Also how do you remove all the old dots when in a new sequence ?
Also how do you remove all the old dots when in a new sequence ?
Re: Saving to file problems
Yes, it is still possible to retrieve the files if you still have them.
For example, when you load a saved project and meet the error "The source image file c:\folder1\myfile.jpg is missing or corrupt. Do you want to locate it?" just choose "Yes", then locate the replacement file c:\folder1\newfile.jpg or c:\folder2\myfile.jpg due to you renamed myfile.jpg to newfile.jpg, or moved it to another folder c:\folder2 after you saved the project.
Choose the Edit/Clear All menu to remove all the old dots.
For example, when you load a saved project and meet the error "The source image file c:\folder1\myfile.jpg is missing or corrupt. Do you want to locate it?" just choose "Yes", then locate the replacement file c:\folder1\newfile.jpg or c:\folder2\myfile.jpg due to you renamed myfile.jpg to newfile.jpg, or moved it to another folder c:\folder2 after you saved the project.
Choose the Edit/Clear All menu to remove all the old dots.
Re: Saving to file problems
Thanks for your help. I've tried one or two other products in the past for long pencil drawing animation sequencies and so far much prefer Fantamorph as it's good fun though still learning. Really like the Preview screen as it's a hard job sometimes trying to link different body positions between Image 1 and 2, especially arms and legs !!
2). I'm also trying to load 2 completed sequencies into Image Sequence Packer but I can only find .png files which I don't know what to do with ? Also there's several entries with .fnp and .bmp ?
1). I'd already clicked on Yes but nothing's appearing ?fantam wrote:Yes, it is still possible to retrieve the files if you still have them.
For example, when you load a saved project and meet the error "The source image file c:\folder1\myfile.jpg is missing or corrupt. Do you want to locate it?" just choose "Yes",
2). I'm also trying to load 2 completed sequencies into Image Sequence Packer but I can only find .png files which I don't know what to do with ? Also there's several entries with .fnp and .bmp ?
Re: Saving to file problems
Can you please send this project file (a .fmp file) to support@fantamorph.com? We'll find out.1). I'd already clicked on Yes but nothing's appearing ?
You should export the completed sequencies as Image Sequence first, then load the exported images to Image Sequence Packer, learn more about How to Use Image Sequence Packer.2). I'm also trying to load 2 completed sequencies into Image Sequence Packer but I can only find .png files which I don't know what to do with ? Also there's several entries with .fnp and .bmp ?
Re: Saving to file problems
Unfortunately I can't find the file anywhere but will send another if it happens again.Can you please send this project file (a .fmp file) to support@fantamorph.com? We'll find out.
Great product and very enjoyable so far !
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Saving to file problems
HI again,
All going well but as I was about to Export swf movie, I noticed in the preview panel that the smooth transition from Image 1 to 2 had suddenly disappeared and was now split up into fragments from start to finish, like broken glass....
Is there anyway to restore the original smooth sequence ?
Thanks
All going well but as I was about to Export swf movie, I noticed in the preview panel that the smooth transition from Image 1 to 2 had suddenly disappeared and was now split up into fragments from start to finish, like broken glass....
Is there anyway to restore the original smooth sequence ?
Thanks
Re: Saving to file problems
I'm not sure I fully understand your question. Did you encounter similar problems on other projects? If the problem only occurred on a particular project, please send us the project, we'll find out.
Re: Saving to file problems
I think it happened once before but couldn't remember why or what caused it as I was still learning.
This time it was the usual smooth Preview ok from Image 1 to 2, but I think because I couldn't remember what I'd done previously in adding sequences I tried adding sequence 5 to the previous 4 by clicking on "Link Sequence", which I think might have then caused the movie in Preview to break up completely. When "Paused" It looked a bit like a broken pane of glass on the floor, shattered. In the end I gave up and had to delete it unfortunately.
What is "Link Sequence" used for ?
Thanks.
This time it was the usual smooth Preview ok from Image 1 to 2, but I think because I couldn't remember what I'd done previously in adding sequences I tried adding sequence 5 to the previous 4 by clicking on "Link Sequence", which I think might have then caused the movie in Preview to break up completely. When "Paused" It looked a bit like a broken pane of glass on the floor, shattered. In the end I gave up and had to delete it unfortunately.
What is "Link Sequence" used for ?
Thanks.
Re: Saving to file problems
Now I knew the fragments problem you met is just caused by "Link Sequence".
When you create a sequence morph from image A to image B, then image B to image C, you can use "Link Sequence" to have image B in the second sequence is completely same as the image B in the first sequence, not only image itself, but also the key dots on the image.
So, there might be problem if you don't place key dots in the same order. For example, in the first sequence A to B, you place dot #1 on the left eye, dot #2 on the right eye, but in the second sequence B to C, you may place dot #1 on the right eye, dot #2 on the left eye, the morph now runs smoothly.
Now, if you click "Link Sequence", in the second sequence B to C, image B will have the same dots of image B in the first sequence A to B, that means dot #1 will be on the left eye, dot #2 on the right eye. However, on image C, dot #1 is still on the right eye, dot #2 is still on the left eye, this conflicting dot order will certainly cause the morph B to C split up into fragments and look "like a broken pane of glass on the floor".
How to avoid this problem? You just need to adjust the dots on image C after use "Link Sequence", or else never use "Link Sequence" if you are not sure you place key dots on all images in the same order.
When you create a sequence morph from image A to image B, then image B to image C, you can use "Link Sequence" to have image B in the second sequence is completely same as the image B in the first sequence, not only image itself, but also the key dots on the image.
So, there might be problem if you don't place key dots in the same order. For example, in the first sequence A to B, you place dot #1 on the left eye, dot #2 on the right eye, but in the second sequence B to C, you may place dot #1 on the right eye, dot #2 on the left eye, the morph now runs smoothly.
Now, if you click "Link Sequence", in the second sequence B to C, image B will have the same dots of image B in the first sequence A to B, that means dot #1 will be on the left eye, dot #2 on the right eye. However, on image C, dot #1 is still on the right eye, dot #2 is still on the left eye, this conflicting dot order will certainly cause the morph B to C split up into fragments and look "like a broken pane of glass on the floor".
How to avoid this problem? You just need to adjust the dots on image C after use "Link Sequence", or else never use "Link Sequence" if you are not sure you place key dots on all images in the same order.
Re: Saving to file problems
Great thanks got it !
Does this mean that if you ever click on "Link Sequence" by mistake in the future, you've got to start again or can it be reversed ? Such as with an "Undo" button ?
Probably best to save a spare copy in case....
Enjoying it all enormously and although I'm still making lots of mistakes and struggling to understand things, I will definitely buy the pro version !!![Very Happy :D](./images/smilies/icon_biggrin.gif)
Does this mean that if you ever click on "Link Sequence" by mistake in the future, you've got to start again or can it be reversed ? Such as with an "Undo" button ?
Probably best to save a spare copy in case....
Enjoying it all enormously and although I'm still making lots of mistakes and struggling to understand things, I will definitely buy the pro version !!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Saving to file problems
For now, all actions between sequences are not undone. We plan to add "undo" for these actions, Add/Delete/Link/Duplicate Sequence etc., in the next version.
Re: Saving to file problems
The "Undo" addition sounds very useful any idea when it's likely to appear, or will it be included as an Update ?
Re: Saving to file problems
It would be available in the next release, version 6, in the next year.
Thank you for your patience.
Thank you for your patience.